HKS 2-SE PLUS
PRODUCE A HIGHER RANGE OF FABRIC QUALITIES AND FABRICS WITH HIGHER MODULUS. STRENGTHEN YOUR POSITION IN THE ELASTIC AREA WITH KOEPER STICH LAPPING.
The HKS 2-SE PLUS is based on the machine concept of the HKS 2-SE. The machine has a modified knitting movement which enables the Koeper stitch lapping in addition to the charmeuse and double tricot lapping. The two needle overlap is implemented by the GB 2 ground bar, which uses elastane. The result are articles with a higher elastic modulus. Swimwear, sportswear and shapewear with high stretch performance are just as much part of the HKS 2-SE PLUS products as fine lingerie qualities. If you are moving in a commodity segment for elastic articles and you want to obtain the highest productivity with your factory, the HKS 2-SE PLUS is your best choice.
Two-way-stretch goods with a good return
A special lapping construction gives the fabric a very high elongation of up to 245%. It also has a good recovery.
Free cut goods with smooth edges
Due to the special intermeshing of the elastane threads, the fabric impresses with its cut-resistant edges.
The high mesh count in combination with the special lapping gives the fabric a soft and smooth surface with a flowing drape.
Low running costs
The replacement cycles for needle leads in knitting machines are about three times longer than those of circular knitting machines. The cost of a set is only about half. Accordingly, the running costs for knitting machines are greatly reduced.
The HKS 2-SE PLUS is particularly characterized by its high efficiency. A high-performance warp knitting machine can produce 4x of fabric output.
Watch our video and learn more about the advantages
FIND YOUR PERFECT MACHINE
KARL MAYER is offering a wide range of HKS 2 bar machines with various functions and possibilities. Please use the tables below to find the suitable product for your future success.
|Machine specification||HKS 2-S||HKS 2-SE PLUS||HKS 2-SE|
|Gauge||E 28, E 32, E 36, E 40, E 44, E 50||E 32, E 36, E 40||E 32, E 36, E 40|
|Working width||130“ + 2“ and 4“ / 180“ + 6“ / 210“ + 8“||130“ + 4“||130“ + 4“ / 180“ + 6“ (upon request)|
|Warp beam support||2x32“
Possible: 2x40“ / 1x35“ 1x25“
|Batching device||No. 6||No. 34A(E)||No. 34A(E)|
|Koeper stich possible||yes||yes||no|
|Target application||HKS 2-S||HKS 2-SE PLUS||HKS 2-SE|
|Sport (non elastic)||++||O||O|
|Outdoor (non elastic)||++||O||O|
O = not suitable / + = suitable / ++ = very suitable / +++ = perfectly suitable
Advantages of Koeper lapping
The difference between 1 needle overlap and Koeper lapping is that you have an overlap over 2 needles. That means that the amount of Elastane in the fabric with the same amount of yarn is much higher. Furthermore, the rebound force is higher with constant stretch.
Find out more about our wide range of fabrics in our virtual Showroom
>> Visit the virtual Showroom