Technical data - RSE 4-1 
Working widths
3302 mm = 130 inches
4318 mm = 170 inches
4826 mm = 190 inches
Gauges
E24, E28, E32 and E40 according to the machine width
further gauges on request
Bars/ knitting elements
Single needle bar and tongue bar, stitch comb bar, knock-over comb bar, 4 ground guide bars
Warp beam support
3 warp beam positions, free-standing, for sectional beams with a flange diameter of 812 mm (32 inches)
Optionally: 4 warp beam positions, free-standing, for sectional beams with a flange diameter of 533 mm (21 inches)
Optionally: 4 warp beam positions, free-standing, for sectional beams with a flange diameter of 812 mm (32 inches)
KAMCOS®
Motion Control / Single Speed for the control of the basic functions
Operator Interface / 12,1" Color Touchscreen for production display, network interface (Ethernet) for networking and connection of the corresponding data acquisition, patterning systems and Teleservice
Optionally: integrated yarn inspection Laserstop
more...
Yarn let-off device
For each completely mounted warp beam position 1 electronically controlled yarn let-off gear, driven by geared motor, controlled via Motion Control
Fabric take-up
Electronically controlled, continuous up to 190 inches, 4-roller system driven by geared motor, controlled via Motion Control
Batching device
No. 18E (Optionally: No. 34A*, 29A, 29B, 29C)
*controlled via Motion Control
Pattern drive
Drive N with 4 pattern discs
integrated tempi change gear drive
Electrical equipment
Speed-regulated main drive, power-failure safe, incl. inching motion function, total connected load 25 kVA
Oil supply
Heating, cooling by means of recirculating air heat exchanger,
circulation by electric pump, filter with dirt-monitoring system
Optionally: heat exchanger for water conditioning systems
instead of the recirculating air heat exchanger
Rights for technical modifications reserved!
We are always at your disposal!
Your contact person:
Mr. Oliver Mathews
Guidance and Sales
Phone.: +49 (0)6104 402-553
contact
or your regional KARL MAYER agency
Information about the machine
RSE 4-1
Dimension and warp beam support
Batching device
